Abstract
Hot plate is a tools to heat up metal shielded circuitry (module) in electronic industry. It is used to heat the metal shield at almost the same temperature if the circuitry is inside the real box (an instrument). In order to simulate that, understanding on temperature requirement is necessary for the target circuitry. Noted that the temperature is not always the same where its depend on the performance test of the device under test (DUT). Hence a computer controlled hot plate is required such that the same computer can control both the test station and the hot plate intelligently.
Objectives
- To design a hot plate device that is computer-controlled.
- To create a user friendly software for the device.
- To use Serial/USB interfacing port.
Methodology
Do some analysis/research for any electrically controlled heater component.
Study the input requirement for the chosen component.
Design a circuit that is able to produce the required input signal.
Think about how the temperature can be stabilized at one point.
Decide which interfacing port is the best.
Choose the easiest software to used as the user friendly interface.
References
- Not available yet.
Posts
0 comments:
Post a Comment